Home Assistant Gateway

Dusun IoT’s Home Assistant gateway serves as the central hub for your home, office, or any preferred spaces. Our hardware integrates with Home Assistant software (HA Supervised), and provides smooth control over Zigbee, Z-Wave, and BLE devices. We aim to deliver time-efficient hardware solutions for connected and automated environment with ease.

Built in Wireless Connectivity for Easy Deployment
Built-in Wireless Connectivity for Easy Deployment
Multiple Raspberry Pi Replacing Solutions
Multiple Raspberry Pi Replacing Solutions
White Label, OEM, and Custom Services Available
White Label, OEM, and Custom Services Available
No Programming Skills Required
No Programming Skills Required

Picking the Right Home Assistant Gateway Hub for Your Solutions

Dusun IoT’s home assistant gateway hub extends IoT connectivity to a diverse array of smart home device.

Develop Home Asssitant on Our Hardware

We understand that every business has unique requirements. Selecting the right hardware first and then developing the software can ensure the final products tailored to your needs and guarantee optimal performance, efficiency, and reliability. To ensure the highest quality and cost-effectiveness, we have a MOQ requirement. FAE technical support provided.

DSGW-210-HA Series vs Others

When it comes to selecting hardware for Home Assistant, there is no one-size-fits-all solution. Comparing DSGW-210-HA Series with other hardware options is not to determine which is superior or inferior, but rather to provide buyers with a clear understanding of their differences, enabling them to make informed decisions.

Comparison ItemsDSGW-210-HAHome Assistant YellowHome Assistant GreenHome Assistant Blue (Discontinued!)
Hardware Performance
ProcessorRockchip RK3328 Quad-core 64-bit Arm Cortex [email protected]Raspberry Pi Compute Module 4 (CM4) Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHzRockchip RK3566 SoC with quad-core Arm Cortex-A55 [email protected]6-Core Amlogic S922X Processor (ARMv8-A)
Quad-core Cortex-A73 @ 2.2Ghz
Dual-core Cortex-A53 @ 1.8GhZ
Momeryup to 2 GBUp to 8 GB RAM4 GB LPDDR4X4GB DDR4
StorageUp to 32 GB eMMCUp to 32 GB eMMC32 GB eMMC flash drive128GB eMMC Flash included
Networking1x RJ45 WAN/LAN Port (10/100 Mbps)Gigabit EthernetOne Gigabit Ethernet port1x RJ45 LAN Port (10/100/1000 Mbps)
RTCRTC operated from an onboard batteryRTC backed by CR2032 battery//
Wireless Connectivity
Zigbee 3.0/
Bluetooth 5.2///
4G LTE CatM1///
WiFi 2.4/5G///
Expansion Slot & Ports
Audio/1x 3.5 mm audio jack/1x 3.5mm Jack
Display//One HDMI port for diagnostic purposes only1x HDMI Output (HDMI 2.0)
Other PortsSIM Card Slot;One USB2.0 port;SD card Up to 128GB;3 x USB 2.0 ports (2 x USB Type-A host port; 1 x USB-C device port);M.2 Slot to plug in an NVMe SSD drive to extend the available space;2x USB 2.0 Type-A Host ports for use with Home Assistant SkyConnect and more;MicroSD slot for recovery purposes only;4x USB Type-A Ports (USB 3.0)
PowerSupport 5V USB Type-C Power Supply12 V / 2 A through barrel DC power jack; PoE (selectable via jumper)DC barrel connector, 12 V DC, 1 ADC 12V/2A
Dimension120mm x 120mm x 30mmnot provided112mm x 112mm x 32mm10.4 cm x 3.6 cm x 9.4 cm
Weight570 gnot provided340 g292 g
BatteryA Lithium back-up Battery/CR2032. Not included. Optional./

1v1 ODM Services to Address All Complex Requests

Custom Design (RF /PCB /Structure /Software)
Prototype Manufacturing
Complete Test & Validation
Manufacturing & Quality Control
Global Delivery
Which is the Best Home Assistant Hardware?

Use Cases of Dusun IoT’s Home Assistant Gateway Hubs

DSGW-210 gateway hub has served as a a Grow Light Controller at a plant factory. With Home Assistant as the brain of gateway hub, the factory system was able to finish communication with BLE mesh lighting (DSM-055 BLE modules flashed), and issued commands such as light on/off to optimize plant development. The process also involved a custom (BLE mesh) add-on development.

Home energy management is made easy with DSGW-210 Zigbee Z-Wave gateway. This versatile hub facilitates home energy monitoring by collecting data from Zigbee 3.0 and Z-Wave devices and uploading data to the cloud via Wi-Fi, with 4G LTE as a reliable network backup. Users can effortlessly gain valuable insights into their energy consumption, enabling informed decision-makng and reduction of wasteful spending.

Procurement Guidelines for Home Assistant Gateway

The Home Assistant comes pre-installed in the gateway, and all of its functions have been successfully migrated.

Sometimes, the default version of supervisor and Core on the HA gateway is not the most recent; however, users need to be reassured because they will be updated automatically after some time has passed.

The gateway supports Wi-Fi Access Point mode. You can connect a few Wi-Fi devices that use a relatively low amount of data to the gateway, and the Dusun Wi-Fi add-on can be used to configure the wireless network’s SSID.

In September, Home Assistant officially made its Bluetooth functionality available to the public. Dusun IoT’s Home Assistant Bluetooth gateway can receive the most recent supervisor software update, and support the Bluetooth function. Check its BLE module Quick Start kit here

There is no requirement for an additional dongle because the Dusun IoT’s Home Assistant ZigBee gateway already incorporates Zigbee and ZWave modules. It is able to be perfectly adapted to a variety of Z-Wave and Zigbee add-ons that are utilized frequently, such as zwavejs2mqtt and zigbee2mqtt.

The Dusun Home Assistant gateway is able to provide reliable support for the connection of up to 40 Zigbee and 40 Z-wave devices, which enables it to completely satisfy the requirements of smart terminals in typical residential settings.

Expanding the storage capacity with an SD card or selecting a larger Emmc gateway product are viable options for resolving this issue.

It is strongly suggested that you take advantage of the ZHA (Zigbee home automation) integration that is included in Home Assistant. Please ensure that the Zigbee module is updated to its most recent version before switching to the zigbee2MQTT add-on.

Once your order reaches the minimum order quantity (MOQ), you can send the specific requirements of the packages that need to be installed in the gateway. Then, in order to assist you in bringing the products to market, we would provide you with a specialized firmware image version.

IoT Gateways for Recommendation


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Welcome to DusunIoT

    Hi there 👋 Is there anything we can help you with today? Please fill in the form below for the team to follow up if you become disconnected.

      DusunIoT Distributor Program

        This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

          This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.