DSGW-097
Model List of DSGW-097 MTK7628 Gateway
| Model | Wi-Fi 2.4G | Bluetooth 5.2 | Zigbee3.0 | Enocean |
|---|---|---|---|---|
| DSGW-097-1 | ● | ● | ● | ● |
Introduction of DSGW-097 MTK7628 Gateway
The DSGW-097 is a ceiling gateway used in the smart home, intelligent security industry, pension services. It a central device, support multiple wireless protocols including Wi-Fi andzigbee3.0, BLE, Z-WAVE. The user can connect the network through Wi-Fi, Ethernet and Cellular network. Besides, smart sensors can be connected through zigbee3.0, BLE, Z-WAVE.
Product Feature Summary
- OS: Linux@ OpenWrt
- USB 5V type C Power supply and PoE Ethernet Power supply
- Processor: MTK7628 (MIPS24KEc(580MHZ)
- RAM: 128MB
- Flash: 16MB
- Support IEEE802.11n,IEEE802.11g,IEEE 802.11b Protocol
- Support zigbee3.0 and thread
- Support BLE5.2
- Support LTE cat M1
- One WAN/LAN variable network port
- Support EnOcean, TCM310
Hardware block diagram
Mechanical Requirement of DSGW-097 MTK7628 Gateway
Drawings
Specifications of DSGW-097 MTK7628 Gateway
Technical Specification
| Power Adapter | Input:100V~240V AC/50~60HZ Output:5V/2A, Micro USB |
| Ethernet | The network interface supports CAT-5/CAT-5E to transmit data and POE Power Supply (voltage range is 44~ 57V). It is WAN/LAN variable. |
| Indicator LEDs | Power LED normally on when powered on Zigbee/Z-WAVE LED is flash when the signal come Wi-Fi LED normally on after connecting to Wi-Fi for 1-2 sec |
| Reset Button | The reset button is hole button, After pressing the reset button for more than 5 seconds, the Gateway will be restored to the factory settings |
| Operating Temperature | -10℃~55℃ |
Performance Requirement
| Wi-Fi Performance | · IEEE wireless LAN standard: · IEEE802.11n; IEEE802.11g; IEEE 802.11b · Data Rate: IEEE 802.11b Standard Mode:1,2,5.5,11Mbps IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps IEEE 802.11n:MCS0~MCS7 @ HT20/ 2.4GHz band · Sensitivity: · HT40 MCS7 : -70dBm@10% PER(MCS7) /2.4GHz band · HT20 MCS7 : -71dBm@10% PER(MCS7) /2.4GHz band · Transmit Power: IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band IEEE 802.11g: 16dBm @54MHz IEEE 802.11b: 18dBm @11MHz · Wireless Security: WPA/WPA2, WEP, TKIP, and AES · Working mode : Bridge、Gateway、AP Client · Range: 50 meters minimum, open field · Transmit Power:17dBm · Highest Transmission Rate: 300Mbps · Frequency offset: +/- 50KHZ · Frequency Range (MHz): 2412.0~2483.5 · Low Frequency (MHz):2400 · High Frequency (MHz):2483.5 · E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW · Bandwidth (MHz):20MHz/40MHz · Modulation: BPSK/QPSK, FHSSCCK/DSSS, 64QAM/OFDM |
| Zigbee3.0 Performance | · TX Power: 19.5dBm · Range: 100 meters minimum, open filed · Receiving Sensibility:-94dBm · Frequency offset: +/-20KHZ |
| Z-WAVE Performance | · TX power: TX power up to 13dBm · RX sensitivity: @100kbps -97.5dBm · Range: 100 meters minimum, open filed · Default Frequency: 916MHz( Different country with differentfrequency) |
| Bluetooth performance | · Bluetooth Protocol: Bluetooth 5.2 · TX Power: 19.5dBm · Range: 150 meters minimum, open filed · Receiving Sensibility: [email protected]%BER · Frequency offset: +/-20KHZ · BLE dual role (peripheral role and central role) |
| LTE cat1 | · LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/ B26(Cat M1 Only)/B27(Cat M1 Only)/B28/B31/B66/ B71(Cat · NB2 Only)/B72/B73/B85/B86*2 (Cat NB2 only)/B87*2 /B88*2 · EGPRS: 850/900/1800/1900MHz |
| Ethernet | · 10/100Mbps |
QA Requirements of DSGW-097 MTK7628 Gateway
Quality &Testing Information
| Information Description | Standard (Yes) custom(No) |
|---|---|
| ESD Testing | YES |
| RF Antenna Analysis | YES |
| Environmental Testing | YES |
| Reliability Testing | YES |
| Certification | FCC,CE ,IC, Z-wave plus, RoHs |
