1. Product Description
1.1. Purpose and Description
The water leak sensor powered by Roombanker is designed to be used in areas where thereis a potential for water leaks for smart home applications and supports Zigbee 3.0. It can be placed on the floor in sensitive areas, when water immersion is detected, the detector sends an alarm signal to the gateway.
1.2. Product Feature Summary
- Highly sensitive sensor
- Easy to Install and Set up
- Stay Connected 24*7
- Intelligent early warning
- Low battery indication function
2. Mechanical Requirement
2.1. Drawing
![MIR-WA100 Water Leakage Sensor 11 Water Leakage](https://www.dusuniot.com/wp-content/uploads/2023/12/Water_Leakage-300x300.jpg)
2.2. Interface
![MIR-WA100 Water Leakage Sensor 12 MIR WA100 Interface](https://www.dusuniot.com/wp-content/uploads/2023/12/MIR-WA100-Interface-259x300.png)
3. Specification
3.1. Technical Specification
Item | Parameter |
---|---|
Protocol | Zigbee 3.0 |
Working Voltage | DC 3V (CR2032 Battery) |
Working Temperature | ‒10°C to +55°C 0% to 99.9% RH |
Low Voltage Alarm Value | 2.2 +/- 0.1 V |
Standby Current | ≤10uA |
Working Current | ≤30mA |
Storage Temperature | ‒25°C to +55°C |
Low Battery Indication | Yes |
Detection Method | Water Sensor Probe |
Water Proof Level | IP66 |
Battery Life | More than one year (20 times per day) |
Dimension | Ø44.8 x 14mm |
Zigbee Performance | ●TX Power: 10 dBm ●Range: 80 meters maximum, open filed Receiving Sensibility:-94dBm ●Frequency offset: +/-20KHZ ●Frequency Range (MHz):2401.0~2483.5 Low Frequency (MHz):2400 ●High Frequency (MHz):2483.5 ●E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW Bandwidth (MHz):5MHz ● Modulation: OQPSK |
4. Onboarding
Step One: Power on
![MIR-WA100 Water Leakage Sensor 13 Step One Power on](https://www.dusuniot.com/wp-content/uploads/2023/12/Step-One-Power-on.png)
Step Two: Press the reset button for 5s and release, the green LED will flash
![MIR-WA100 Water Leakage Sensor 14 Step Two Press the](https://www.dusuniot.com/wp-content/uploads/2023/12/Step-Two-Press-the.png)
5. Installation
Place the product in the detection area
![MIR-WA100 Water Leakage Sensor 15 Place the product in the detection area](https://www.dusuniot.com/wp-content/uploads/2023/12/Place-the-product-in-the-detection-area-300x149.png)