Helium builds amazing connected solutions on the world’s largest decentralized wireless network. Helium has tried a new model, using future money to incentivize ordinary people to make the network and its unique PoC algorithm to verify and reward the network participants. In other words, increasing the coverage of hotspots is generally equivalent to increasing revenue.
Expanding the coverage of hotspots can also help the Helium ecosystem be better established, forming an excellent positive feedback system. How can you improve the hotspot coverage when you have a working Helium Miner?
The answer is to replace the proper antenna, which is the easiest way. But what is the suitable antenna for your helium miner? What are the metrics to evaluate an antenna? This article introduces the primary indicators of various antennas as simply as possible to help readers choose a suitable antenna.
Efficiency
First, let’s clarify that the antenna is a passive device because it does not need external power to work when there is a signal. It simply converts the guided waves on the transmission structure into free space waves and is a conversion device or transducer between guided waves and free space waves.
The antenna receives the input signal and transmits it. The power radiated by the antenna must be less than the power input because the antenna will also have losses. The efficiency of the antenna represents this indicator.
The efficiency of an antenna is the ratio of the power delivered to the antenna to the energy radiated by the antenna. Some of the power transmitted to the antenna will be absorbed as losses, and some will be reflected due to impedance mismatch. In addition, the antenna has a perfect feature: the efficiency is the same as a transmitting antenna and a receiving antenna.
Therefore, a crucial indicator of the antenna is its efficiency. A high-efficiency antenna means that the antenna radiates most of the power at the input. In contrast, a low-efficiency antenna absorbs most of the power as losses within the antenna are reflected away due to impedance mismatches.
Directivity and antenna gain
In addition, since the antenna is a passive device, the power it radiates depends more on the input energy. When the power output from the miner to the antenna is constant, assuming that the antenna radiates evenly in all directions in space (see Figure 1: ideal radiation point source), the power at each angle should be the same.
![How to choose an antenna for a helium miner? 1 image 51](http://dusuniot.com/wp-content/uploads/2022/07/image-51.webp)
Figure 1: Ideal radiating point source
If you want to transmit farther, then the radiated power of the antenna must be higher. But a fact is that the total power is certain. Therefore, if the antenna can reduce the radiated power in the direction we do not expect, and radiate this part of the reduced power in the direction we expect, then the radiated power in this direction becomes the original power plus an additional increased power. In this way, the total radiated power in this direction is increased.
![How to choose an antenna for a helium miner? 2 image 52](http://dusuniot.com/wp-content/uploads/2022/07/image-52.webp)
Figure 2: Antenna Pattern
The degree of directionality of this radiation is the directivity of the antenna.
The antenna gain is the ratio of the radiated power density of the antenna in a specified direction to the radiated power density of the reference antenna (usually using an ideal radiation point source).
![How to choose an antenna for a helium miner? 3 image 53](http://dusuniot.com/wp-content/uploads/2022/07/image-53.webp)
Figure 3: Antenna Gain
Half power beamwidth
At the same time, it is not difficult to understand that when the antenna’s gain is higher, its directivity is higher because more power is reduced in other directions. Higher directivity means that the direction of the radiation is more focused. Use a typical example to illustrate: on a night, when a light bulb is lit, it will illuminate the surroundings evenly, and the ideal radiant power source illuminates the surrounding light bulbs like this, evenly, but not very far away; A high-gain antenna is like a flashlight (same power as a light bulb), which can illuminate a long distance in a particular direction, but not uniformly.
Although the flashlight can illuminate a long distance, the farther the place you want to illuminate, the more concentrated the energy, and the narrower the angle that can be inspired. There is an indicator used to describe the angle of illumination, which is the half-power beam. Width (HPBW).
![How to choose an antenna for a helium miner? 4 image 54](http://dusuniot.com/wp-content/uploads/2022/07/image-54.webp)
Figure 4: Horizontal omnidirectional antenna pattern
Half-power beamwidth (HPBW) is the angle at which the magnitude (gain) of the radiation pattern is reduced by 50% (or 3 dB) from the peak of the main beam.
In typical applications, it can be simply considered that the receiving antenna is within this angle, and the antenna will have a better effect.
Understanding the effect of antenna gain through the Friis transmission equation
We mentioned the antenna gain above, so what role does the antenna gain play in our use? Here we use a simple formula to illustrate:
According to the improved Friis transmission equation, ideally (without obstructions), wireless communication satisfies:
![How to choose an antenna for a helium miner? 5 image 55](http://dusuniot.com/wp-content/uploads/2022/07/image-55.webp)
Among them, they each represent:
Pt —- the transmit power of the transmitter
Pr —- the sensitivity of the receiver
Gt —- transmit antenna gain
Gr —- receive antenna gain
f —- carrier frequency
d —- distance between receiving and transmitting antennas
c —- speed of light (3 x 10 8m/s)
Lc —- Feeder insertion loss of base station transmit antenna
![How to choose an antenna for a helium miner? 6 image 56](http://dusuniot.com/wp-content/uploads/2022/07/image-56.webp)
—- air propagation loss due to environment
A simple operation of the above formula yields:
![How to choose an antenna for a helium miner? 7 image 57](http://dusuniot.com/wp-content/uploads/2022/07/image-57.webp)
It can be concluded that when the transmit power and receive sensitivity are fixed, increasing the gain of the transmit antenna and the receive antenna can increase the maximum transmission distance. In this simple way, to improve the coverage of the hotspot, the antenna’s gain needs to be increased.
Choosing your helium antenna
With the fundamental indicators explained above, let’s discuss how to choose a suitable Helium gateway antenna.
1. First, confirm the working frequency of the antenna.
Since Helium gateway is built on LoRa technology, LoRa uses frequency bands that do not require licenses. Each country or region divides the frequency bands that do not require licenses to be different. So we need to buy Helium LoRaWAN gateway and antenna that can typically work in our area.
For specific frequency bands, please refer to the information given by Helium:
https://docs.helium.com/lorawan-on-helium/frequency-plans
2. Determine whether to choose a directional antenna or an omnidirectional antenna
The omnidirectional antenna generally mentioned refers to the horizontal omnidirectional antenna, which is characterized by being oriented in the vertical direction, but omnidirectional in the horizontal direction (see Figure 4: Horizontal omnidirectional antenna pattern). When you mount it upright, it will receive and transmit signals horizontally 360°, making it ideal for applications like Helium that require hotspot coverage.
But if you live like a sea without hotspot coverage behind you, you can also use a directional antenna. Just make sure the pattern of your directional antenna is aimed at the area you want to cover.
3. Choose a high-efficiency antenna
Generally speaking, the efficiency mentioned by the antenna factory refers to the total efficiency, that is, the antenna radiation efficiency * (1-impedance mismatch loss). So sometimes, blindly pursuing a VSWR that is too low is not necessarily better (but I’m sure it will become more expensive).
Simply calculate how much loss will be caused by the difference in VSWR. Suppose there are two antennas here, one with a VSWR of 1.8 and the other with a VSWR of 1.2.
![How to choose an antenna for a helium miner? 8 image 58](http://dusuniot.com/wp-content/uploads/2022/07/image-58.webp)
Then:
![How to choose an antenna for a helium miner? 9 image 59](http://dusuniot.com/wp-content/uploads/2022/07/image-59.webp)
Transmission power factor:
![How to choose an antenna for a helium miner? 10 image 60](http://dusuniot.com/wp-content/uploads/2022/07/image-60.webp)
The first one:
![How to choose an antenna for a helium miner? 11 image 61](http://dusuniot.com/wp-content/uploads/2022/07/image-61.webp)
The second one:
![How to choose an antenna for a helium miner? 12 image 62](http://dusuniot.com/wp-content/uploads/2022/07/image-62.webp)
It can be seen that when the VSWR of the antenna is 1.8 and 1.2, the difference in power loss due to impedance mismatch is minimal. If the radiation efficiencies of the antennas are all 70%, the total efficiencies are 64.26% and 69.42%, respectively.
The overall efficiency is only 5% worse, but the price can vary widely. Therefore, instead of paying too much attention to low VSWR, it is recommended that you pay more attention to the total efficiency, which is the index parameter that can genuinely reflect the antenna’s performance.
Choose your own high/medium/low gain antenna
Finally, once again, the antenna is a passive device. The so-called high gain increases the gain in the specified direction by reducing the gain in other directions. For the omnidirectional antenna commonly used by Helium LoRaWAN gateway, the higher the gain, the more focused the antenna, and the smaller the radiation angle.
At the same time, practical factors such as multipath transmission and the first Fresnel zone should also be considered. Therefore, it cannot be said that the higher the antenna gain, the better the effect. However, it should be combined with the environment in which it is located, and an antenna with a suitable gain should be comprehensively considered.
The following is the direction diagram of the one-element, two-element, and three-element half-wave dipole antennas to explain the directivity and applicable scenarios of antennas with different gains.
![How to choose an antenna for a helium miner? 13 image 63](http://dusuniot.com/wp-content/uploads/2022/07/image-63.webp)
Figure.5 One-element half-wave dipole pattern
![How to choose an antenna for a helium miner? 14 image 64](http://dusuniot.com/wp-content/uploads/2022/07/image-64.webp)
Figure.6 The pattern of the binary half-wave dipole
![How to choose an antenna for a helium miner? 15 image 65](http://dusuniot.com/wp-content/uploads/2022/07/image-65.webp)
Figure.7 Three-element half-wave dipole pattern
Figure 5 is a standard half-wave dipole antenna, and the gain is 2.44dbi, the antenna half-power beamwidth (HPBW) = 76°, and the antenna only radiates shallow energy in a small range up and down. Figure 6 is a binary half-wave dipole antenna; the gain is 4.82dbi, the antenna half-power beamwidth (HPBW) = 48°, and the area where the antenna radiates shallow energy becomes wider.
Figure 7 is a three-element half-wave dipole antenna with a gain of 6.43dbi, which does not meet the regulatory requirements. Currently, the antenna’s half-power beamwidth (HPBW) is 30°. At this time, the antenna has appeared in the side lobes. The main lobe and the side lobe The radiated energy of the antenna is also very low in the region in the middle of the lobe.
Therefore, high-gain antennas should not be used blindly in pursuit of gain but should be selected according to their geographical environment.
For example, we recommend using LoRaWAN gateway with low-gain antennas in a city with many high-rise buildings. At this time, the antenna covers ample space, and even if you live in a high-rise building, it can radiate well to low places. A medium-gain or low-gain antenna can be used in towns with few tall buildings.
The propagation path of the antenna is less obstructed, and the antenna covers a long distance. In sparsely populated plain areas, it is necessary to use a high-gain antenna to radiate the signal as far as possible through the antenna.
Conclusion
To choose a suitable Helium miner antenna, consider the following points.
1. Determine the working frequency of the antenna.
2. Select a directional or omnidirectional antenna.
3. Choose a high-efficiency antenna instead of pursuing a low VSWR.
4. Choose an antenna with a suitable gain according to where you live.
Dusun IoT‘s indoor hotspot can be your trusted choice, which stands out among the Helium miners with its excellent antenna performance. Welcome to know more about our Helium LoRaWAN gateways: