Product Name: WiFi/Bluetooth/Zigbee Enabled Smart Switches
Model Name: DSW-010
Model Name: DSW-011
Model Name: DSW-012
![Smart Switch Specification 1 smart switch 1](https://www.dusuniot.com/wp-content/uploads/2022/07/smart_switch_1.png)
![Smart Switch Specification 2 smart switch 2](https://www.dusuniot.com/wp-content/uploads/2022/07/smart_switch_2.png)
![Smart Switch Specification 3 smart switch 3](https://www.dusuniot.com/wp-content/uploads/2022/07/smart_switch_3.png)
Connectivity Model List of Smart Switches
Model | Wi-Fi 2.4G | Zigbee 3.0 | Bluetooth 5.0 |
---|---|---|---|
DSW-010-1 | ● | ||
DSW-010-2 | ● | ||
DSW-010-3 | ● | ||
DSW-011-1 | ● | ||
DSW-011-2 | ● | ||
DSW-011-3 | ● | ||
DSW-012-1 | ● | ||
DSW-012-2 | ● | ||
DSW-012-3 | ● |
1. Introduction of WiFi/Bluetooth/Zigbee Enabled Smart Switches
The smart wall switch is WiFi/Bluetooth/Zigbee enabled, which the user can remotely control the opening and closing of the switch by connecting to a smart gateway.
This wireless smart switch has the advantages of the simple operation, high stability, strong anti-interference ability, and low power loss. After the interior is arranged, the status of all the lights in the room will be displayed on each switch.
- Easy to Install
- High reliability
- Supporting timing control: Set the time to automatically on/off
2. Mechanical Requirement of WiFi/Bluetooth/Zigbee Enabled Smart Switches
![Smart Switch Specification 4 smart switch 4](https://www.dusuniot.com/wp-content/uploads/2022/07/smart_switch_4.png)
![Smart Switch Specification 5 smart switch 5](https://www.dusuniot.com/wp-content/uploads/2022/07/smart_switch_5.png)
3. Specifications of WiFi/Bluetooth/Zigbee Enabled Smart Switches
Operation temperature | -10~ +50°C |
Operation humidity | 5%-95%RH |
Housing material | (V0 grade flame retardant PC) |
Wireless Protocol | Wi-Fi or zigbee3.0 or Bluetooth |
Switch class | GB/T 15092.1 |
Socket class | GB/T 2099.1,GB/T 1002 15092.1-2010 |
Certification | CE/FCC |
Bluetooth-Performance | ●TX Power: 19.5dBm ●Bluetooth: 19.5dBm ●Range: 150 meters minimum, open filed ●Receiving Sensibility: [email protected]%BER ●Frequency offset: +/-20KHZ ●Frequency Range (MHz):2401.0~2483.5 ●Low Frequency (MHz):2400 ●High Frequency (MHz):2483.5 ●E.i.r.p (Equivalent Isotopically Radiated power) (mW)<10mW ●Bandwidth (MHz):2MHz ●Modulation: GFSK |
Wi-Fi Performance | ●IEEE wireless LAN standard: IEEE802.11n; IEEE802.11g; IEEE 802.11b ●Data Rate: IEEE 802.11b Standard Mode:1,2,5.5,11Mbps IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 MbpsIEEE 802.11n: MCS0~MCS7 @ HT20/ 2.4GHz band MCS0~MCS7 @ HT40/ 2.4GHz band ●Sensitivity: IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band IEEE 802.11g: 16dBm @54MHz IEEE 802.11b: 18dBm @11MHz ●Wireless Security: WPA/WPA2, WEP, TKIP, and AES ●Working mode : Bridge、Gateway、AP Client ●Range: 50 meters minimum, open field ●Transmit Power:17dBm ●Highest Transmission Rate: 300Mbps ●Frequency offset: +/- 50KHZ ●Frequency Range (MHz): 2412.0~2483.5 ●Low Frequency (MHz):2400 |
Zigbee Performance | ●TX Power: 17.5dBm ●Range: 100 meters minimum, open filed ●Receiving Sensibility:-94dBm ●Frequency offset: +/-20KHZ ●Frequency Range (MHz):2401.0~2483.5 ●Low Frequency (MHz):2400 ●High Frequency (MHz):2483.5 ●E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW ●Bandwidth (MHz):5MHz ●Modulation: OQPSK |
Indicator light status description | Flashing: The device enters the search network status |
Slow flash: Device networking | |
Constantly bright: The device is connected to the network and lights up |
4. Installation of WiFi/Bluetooth/Zigbee Enabled Smart Switches
- Use the tool to open the button/panel.
- Strip the wire insulation layer about 10-12 mm.
- Insert the wire into the hole of the base post and make sure it is inserted all the way, then tighten the wire with a flat or Phillips screwdriver to complete the connection.
- Use a fixed screwdriver to tighten the mounting bracket to the cassette, then press the button to complete the installation.
- This product should be installed and commissioned by qualified professionals in accordance with the electrical specifications and product specifications.
![Smart Switch Specification 6 smart switch 6](https://www.dusuniot.com/wp-content/uploads/2022/07/smart_switch_6.png)
![Smart Switch Specification 7 smart switch 7](https://www.dusuniot.com/wp-content/uploads/2022/07/smart_switch_7.png)
Network access: button reset button for 5 times(within 4 seconds), the flashing device enters the distribution mode, the indicator flashes for 40 seconds and then goes out. After 40 seconds, the indicator is off and the device is successfully connected to the network.
Exit the net: The button reset button is pressed 5 times (within 4 seconds) to enter the exit mode.
* The pairing operation between smart home gateway and smart system must refer to the gateway manual.